Security (Access Control / Video Surveillance / Intrusion)
Security takeoffs: card readers, cameras and door hardware, counted
Upload the Division 28 spec and security plans. BidTakeoff counts card readers, door contacts, REX devices, cameras and intrusion devices by room and door, and lists head-end panels and NVR/VMS equipment.
50 free credits. An estimating aid — always verify before you bid.
Example Security takeoff
A fictional project showing the results screen and Excel export.
Single-story office and warehouse. Card access at all perimeter doors and IT/secure rooms, interior and exterior cameras on a VMS, and intrusion detection at the office suite. Door hardware schedule on A-601 used for electrified hardware.
| Lobby/Reception | 1 |
| IDF/MDF | 1 |
| Warehouse | 1 |
| Open Office | 1 |
- 8 cameras in Warehouse 130 — confirm none are duplicated across sheets SEC-201 and SEC-202.
- Q1Confirm whether door hardware is furnished by Div 08 (Security to provide wiring and termination only).
| Card Readers | Card reader (mullion) | 2 | SEC-101 |
| Door Contacts | Recessed door contact | 2 | SEC-101 |
| REX/Request-to-Exit | Motion REX | 2 | SEC-101 |
| Electrified Hardware | Electrified strike | 2 | A-601 |
| Cameras | Fixed dome camera, 4MP | 1 | SEC-201 |
| Intercom | IP video intercom | 1 | SEC-101 |
Quantities are editable before you export.
What you get
- ✓Access control device counts per door and room
- ✓Camera counts by area, with interior/exterior notes
- ✓Panels, power supplies and head-end from risers and schedules
- ✓Open questions flagged as RFI-ready items
Categories counted
Card Readers, Door Contacts, REX/Request-to-Exit, Electrified Hardware, Access Panels/Controllers, Cameras, NVR/VMS, Intrusion Sensors & Keypads, Intercom, Power Supplies, Cabling, Other.
Spec sections we read
Division 28 10 xx (access control), 28 20 xx (video surveillance), 28 30 xx (intrusion detection), door hardware coordination, security device schedules.
Frequently asked questions
What files can I upload?+
PDF specifications (project manual or individual trade sections) and PDF drawing sets — including full 100% CD sets with every discipline. BidTakeoff finds your trade's sheets automatically. Files up to 1 GB.
Can I quote from drawings only, without a spec?+
Yes. Many bids only include a CD set. BidTakeoff reads the legend and schedules, counts devices on each trade plan by room, and uses the architectural plans for the room list when needed.
Which trades are supported?+
Audiovisual, IT/low-voltage structured cabling, security (access control, video surveillance, intrusion), fire alarm, DAS/ERRCS, and general low voltage. You can scan for several trades in one job.
Does it write RFIs?+
Yes. Every takeoff includes draft RFI questions for conflicts and gaps it finds — spec vs. drawing mismatches, rooms with no devices, missing legends or schedules, and by-others items — with sheet and section references. They're in the results and on the RFIs & Assumptions tab of the Excel export. Review and edit before sending.
How accurate is it?+
It is an AI estimating aid, not a final count. It is designed to get you most of the way in minutes and flag open questions, but every quantity should be verified against the contract documents before you price your bid.
How much does it cost?+
Credits are charged per page: 1 per spec page and 2 per drawing sheet, with each additional trade adding 50%. Monthly plans start at $99 for 1,000 credits; one-time packs are also available. You see the exact cost before anything runs, and failed jobs are refunded.
What happens to my bid documents?+
Uploaded files are deleted automatically as soon as your takeoff finishes. Documents are processed by our AI provider under terms that prohibit training on your data. You can delete your account and results at any time.